Set: oil, axle seals, differential seal and flush for 5-speed manual gearbox F17 and F13

Opel Vectra B 1996 - 2002

Set contains:

Application:

Opel Vectra B 1996 - 2002

synthetic oil FUCHS TITAN SINTOFLUID 1L 75W80 - 2 original differential cover gasket - 1 Corteco driveshaft seals left and right side - 2 pcs Liqui Moly Getriebereiniger 3321 gearbox fluid - 1 pcs

1.6 16V - X16XEL - 74kW / 100HP

Specification:

!!! In the F13 and F17 boxes after 2012, a different oil is used with the number 1940004 !!!

Oil change:

Manual gearbox F17 and F13

number of gears: 5gear control: stick (Astra F / Astra G / Astra H) | cables (Astra J) quantity of oil: 1.6L

draining oil fig. no. 1 - oil from the gearbox is drained by turning the cover of the differential mechanism, flooding with fresh oil - there are two methods: the first one is by unscrewing the reverse gear sensor fig. no. 2 pour oil until it appears in the overflow plug, the second pour oil through the overflow plug until the oil pours out

differential cover, reverse gear sensor, overflow plug

FUCHS TITAN SINTOFLUID SAE 75W-80 gear oil

Oil for use in all 5 and 6 speed manual gearboxes manufactured up to 2012:

!!!! Oil not used in the following models !!!!

F13F15F17F18F20M20F23M32F40

ARENAMOVANOVIVAROCAMPOFRONTERA BCOMBO ECROSSLAND XGRANDLAND XVIVAKARL

Original differential cover gasket - 370034 / 90345227

Corteco left and right driveshaft seals - 374197 / 90182165

Specification:

inner diameter 1 [mm]: 35outer diameter 1 [mm]: 54Height 1 [mm]: 10Height 2 [mm]: 15Material: ACM (polyacrylic-rubber)Dust protection: with dust lip sealThread type: Variable thread

Liquid for manual gearboxes by Liqui Moly Getriebe Additive

The content of the package 150ml is enough for 4L of oil

Usage:

Liqui Moly 3321 is used to clean the inside of the gearbox before changing the oil. Manual transmission oil is subject to natural wear. High pressure between the teeth of the gears, high temperature and moisture cause the oil to blacken over time. Used oil is less viscous and contaminates the inside of the gearbox. Use at every oil change.

The additive should be poured through the overflow plug. If the gearbox is full, drain about 150 ml of the old oil and pour in preparation No. 3321. After this operation, drive about 5-10 kilometers using all gears. Then drain the old oil and fill with new gear oil that meets the gear manufacturer's specifications.